Máy sấy UV Dymax ECE-5000

The Dymax 5000-EC Series UV curing flood lamps are designed for high-intensity, rapid UV curing of UV adhesives, UV coatings, and UV inks. 5000-EC UV curing lamps are designed for processes requiring higher-intensity UV light concentrated in a narrow 5″ x 5″ area. The 5000-EC series UV flood lamps deliver concentrated light primarily in the UV-A range (320-390 nm wavelength) to achieve maximum UV cure depths and “tack-free” cures, typically in 10-30 seconds. Dymax UV flood lamps provide low-cost cures for bonded or coated areas larger than 1/2 inch2 or can be used for small batch processing or conveyor-mounted UV curing.

The faster curing capability of the 5000-EC UV flood lamp systems gives them the additional ability to cure UV conformal coatings. They are also used for a variety of UV bonding, UV potting, UV sealing, UV tacking, and UV encapsulating applications within the industrial, automotive, electronic, medical device, and optical industries.

Available Globally – CE-Marked

Specifications

 
Output Power 400 Watts
UV Light Source Unfiltered UVA flood
Typical Intensity in the UVA range (320-390 nm1)
Measured three inches from the bottom edge of the reflector housing		 225 mW/cm2
Dimensions of Illuminated Area 5″ x 5″ (12.7 cm x 12.7 cm)
EC Input Power Requirements Universal 90-265 VAC (grounded), 47-63 Hz
Power Supply Weight 12.25 lbs. (5.6 kg)
Power Supply Dimensions (approximate) 12″ L x 16″ W x 4.25″ H (30.5 cm x 40.6 cm x 10.8 cm)
Reflector Housing Dimensions (approximate) 6.75″ L x 6.75″ W x 8″ H (17.2 cm x 17.2 cm x 20.3 cm)
Reflector Housing Weight 2.7 lbs (1.2 kg)
Sản phẩm cùng loại