Features

>15 W/cm²*; optimized design for curing a wide range of formulations; constant intensity; low cost to purchase and maintain (high ROI); cool cures – ideal for thermally sensitive substrates; variety of compatible lightguide configurations; useful LED life up to 20,000 hours!; intensity adjustment feature from 0% to 100%; instant on/off (no warm-up); small form factor; foot switch or PLC controlled exposure time

Features

Cường độ UV >15 W/cm² tại khoảng cách 0.5"  khi dùng Singple Pole  liquid lightguide (spot mode)*; lightguide cure capability with LED in spot mode (using industry-standard liquid or fiber-optic lightguides and existing light delivery fixtures); Ở chế độ Spot Mode, có thể dùng Singple  or multi-pole Lightguide với cường độ UV lên tới 15 W/cm²

Features

>15 W/cm²*; optimized design for curing a wide range of formulations; constant intensity; low cost to purchase and maintain (high ROI); cool cures - ideal for thermally sensitive substrates; variety of compatible lightguide configurations; useful LED life of over 20,000 hours; intensity adjustment feature from 0% to 100%; instant On/Off (no warm-up); small form factor; foot switch or PLC controlled exposure time

Features

High-intensity spot-curing system features all the benefits of LED-curing technology in a smaller, more versatile unit; control up to four LED heads independently for greater curing flexibility; LED heads available in 365, 385, and 405 nm and can be outfitted with 3-, 5-, or 8-mm diameter focusing lenses

Features

>17,000 mW/cm² initial intensity; patented intensity adjustment feature; simple to operate and adjust; easy-to-read, lighted front panel LCD display with enhanced unit status and notification displays; improved user interface for easier operation; up to 2,000 hours useful bulb life; wide range of liquid/fiber, single/multi-pole lightguides available

High-Intensity Curing System with the Flexibility of Multiple Systems

CE Marked – Available Globally

The BlueWave^® MX-150 curing system provides manufacturers with the curing flexibility they need, in a smaller, more efficient design. The unit is comprised of two main parts, a controller with an easy-to-use touchscreen interface and a high-intensity LED emitter which is uniquely designed to offer higher, more consistent curing intensity than traditional spot-curing systems. Curing energy is created using an LED chip in the emitter, unlike traditional spot-cure systems, where it is located in the controller. Locating the LED chip at the point-of-cure provides more consistent curing by addressing potential intensity loss caused by the use of long or bent lightguides.

With this new design, the system can be truly tailored to users’ curing needs – allowing them to choose from three different wavelength LED emitters (365, 385, or 405 nm) so optimal cures are achieved. Users also have endless set up flexibility; for automated curing processes, the emitter can be easily mounted to robotic arms or further from the controller without fear of intensity variations. When used as a bench-top curing system, the unit can be paired with a stand and shielding or a lightguide can be connected to the system for specialized applications.

Heat Control

For applications with heat-sensitive components, interruptions in the exposure duration can slow the materials’ temperature climb during the cure process. This isn’t a concern with the BlueWave® MX-150 because the curing profile can be optimized to reduce the risk of substrate damage.

Admin and Production Modes

The admin mode fully unlocks the device and allows for setting curing time and intensity cycles. Each individual curing cycle can be entered and saved as a program and recalled when needed. The production mode is designed for simple operation by manufacturing personnel. Settings and access to admin mode can be password protected using the full QWERTY keyboard.

High-Intensity Curing System with Expansion Capabilities

CE Marked – Available Globally

Dymax’s next-generation curing system, the BlueWave^® MX-250, provides manufacturers with the curing flexibility of past systems but with new expansion capabilities. The unit is comprised of two main parts, a controller with an easy-to-use touchscreen interface and a uniquely designed, high-intensity LED emitter. The LED emitter provides better uniformity and more consistent curing-energy emissions than traditional flood-curing systems over a 50 mm x 50 mm curing area. Curing energy is created using a micro-processor-controlled LED chip set in the emitter. Multiple systems can be grouped together to create larger curing pattern matrixes as needed.

With this new design, the system can be truly tailored to users’ curing needs – allowing them to choose from three different wavelength LED emitters (365, 385, or 405 nm) and providing additional flexibility with the size and pattern of the active curing area. Users also have endless set up flexibility, as this system can be set up as a bench-top unit, or for automated curing processes, the emitter can be easily mounted to robotic arms or further from the controller without fear of intensity losses.

Admin and Production Modes

Admin mode fully unlocks the device and allows for setting curing time and intensity cycles. Each individual curing cycle can be entered and saved as a program, and recalled when needed. The production mode is designed for simple operation by manufacturing personnel. Settings and access to admin mode can be password protected using the full QWERTY keyboard.

Systems and Accessories

A complete BlueWave® MX-250 system features a controller/power supply and LED emitter. Emitters are available in 365, 385, and 405 nm wavelengths. Accessories noted below can be added for specific applications. Components are sold separately. Units are warrantied against defects in material and workmanship for one year from date of purchase.

Dymax 12″ wide UV curing conveyors offer consistent, fast, and safe UV curing. These conveyors are designed for UV curing adhesives, coatings, and inks and can be outfitted with either standard metal halide (longwave “D”) or mercury (shortwave “H”) bulbs.

Features

• Consistent UV curing
• Complete UV shielding
• Adjustable lamp to belt distance
• 4″, 6″, or 10″ vertical clearance
• Integral cooling and vacuum hold-down
• 1 to 27 fpm or 25 to 115 fpm
• 5,000 hour bulb life
• <2,500 mW/cm²
• Bench-top conveyor (cart optional)

Consistent line speed, consistent lamp height, and consistent UV output provide a consistent UV cure. These UV conveyors do not emit stray UV light despite utilizing some of the most intense UV curing systems on the market. These conveyors can be outfitted with one or two high-intensity Fusion F300s as shown in the configurations below.

With Multiple UV Curing Floodlamp Options

Not Available in Europe

Dymax UVCS SideCure UV curing conveyors configured with UV curing lamps on the left, right, and/or top offer consistent, fast, and safe UV curing from both the top and/or the sides. These conveyors are designed for 180° curing of UV curable adhesives, UV curable coatings, and UV curable inks. These conveyors can be outfitted with either standard metal halide (longwave), mercury (shortwave), or visible bulbs.

Consistent line speed, consistent lamp height, and consistent intensity together provide a consistent UV curing process. These conveyors do not emit stray UV light and can be outfitted with one to eight moderate-intensity 5000-EC UV flood lamps in the configurations shown further below. Popular end-use applications include UV curing of bonding, masking, and coating applications in the medical, electronics, aerospace, and industrial industries

The Dymax UVC-8 Conveyor is designed for curing UV/Visible light-curable adhesives, coatings, and inks. This cost-efficient and versatile conveyor system is perfect for both production and lab environments, and can be used in a number of different industries. Typical substrates that are bonded, coated, or encapsulated include paper, plastic, metal, glass, laminated materials, printed circuit boards, and many others.

Features

• Fast cures for higher throughput – intensity up to 800 mW/cm²
• Controlled and consistent cure times
• Adjustable lamp-to-belt distance to accomidate various part heights
• Dependable, heavy-duty conveyor design with fully shielded lamp enclosures
• Digital control panel, compact PLC
• Optional intensity adjustment (40-100%)
• Optional dichronic lamp reflectors and IR filters for curing on temperature-sensitive substrates are available

The UVC-8 Conveyor is equipped with a 220-mm wide Teflon^®-coated belt and can be outfitted with one, two, or three UV lamps. The distance between the lamp and the belt can be manually adjusted (between 60-100 mm) as well as the belt speed (0.5-12 m/min). This enables the operator to tailor the curing conditions to the specific application. The conveyor also features a digital control panel where various parameters such as operating hours, lamp current, and the UV set point can be monitored.

The Dymax UVC-5 Conveyor is designed for curing UV/Visible light-curable adhesives, coatings, and inks in a variety of different industries. This system is ideal for curing smaller parts and can cure materials applied to a variety of substrates including paper, plastic, metal, glass, laminated materials, printed circuit boards, and many others.

Features

• Intensity up to 400 mW/cm²
• Controlled and consistent cure times
• High power lamp (910 or 800 W)
• Adjustable lamp-to-belt distance (15 to 60 mm)
• Dependable, heavy-duty conveyor design with fully shielded lamp enclosures
• 120-mm wide Teflon^®-coated belt with adjustable speed (1-10 m/min. range)
• Two bulb options, Fe or Hg

The UVC-5 Conveyor is equipped with a 120-mm wide Teflon^®-coated belt and one UV lamp. The distance between the lamp and the belt can be manually adjusted (between 15-60 mm) as can the belt speed (1-10 m/min). This enables the operator to tailor curing conditions to specific application requirements. The conveyor also features a counter to track hours of operation, an electric control unit located in the transportation device, and an air-cooled casing with an aluminum reflector for the bulb.

12″ Wide UV Curing Conveyor Systems (UVCS) with 5000-EC Flood Lamps

Not Available in Europe

Dymax 12″ wide UV light curing conveyor systems offer consistent, fast, and safe UV curing. These conveyors are designed for curing UV curable adhesives, UV curable coatings, and UV curable inks and can be outfitted with either standard metal halide (longwave) or mercury (shortwave) bulbs.

Features

• Consistent UV curing
• Complete UV shielding
• Adjustable lamp-to-belt distance
• 4″, 6″, or 10″ vertical clearance
• Integral cooling and vacuum hold-down
• 1 to 32 fpm
• Bench-top conveyor (cart optional)

Consistent line speed, consistent lamp height, and consistent intensity together provide a consistent UV curing process. These conveyors do not emit stray UV light and can be outfitted with one, two, or four moderate intensity 5000-EC UV flood lamps in the configurations shown on the “Images & Diagrams tab.

1200-EC Series Focused Beam UV Flood Lamp Systems

The Dymax 1200 Series focused beam UV curing flood lamps use high-intensity UV/Visible light for the rapid curing of UV adhesives, UV coatings, and UV inks. A Dymax 1200-EC UV flood lamp delivers broad-spectrum light concentrated primarily in the UV-A range (320-390 nm wavelength) to achieve maximum cure depths and tack-free cures, typically in 10-30 seconds. Dymax 1200-EC UV flood lamps are specifically designed for applications requiring high-intensity UV light concentrated in a narrow 1″ x 6″ beam.

1200-EC focused beam UV curing lamps provide low-cost cures for bonded or coated areas larger than 1/2 inch and can be used for UV curing trays of small parts or parts arranged in a linear configuration. They are used for a variety of UV bonding, UV potting, UV sealing, UV tacking, and UV encapsulating applications within the industrial, automotive, electronic, medical device, and optical industries.

The 1200-EC UV curing flood lamp consists of a power supply, reflector housing and 400 Watt metal halide UV curing bulb. Accessories can be ordered with or retrofitted to the UV curing lamp after purchase, including shutter assemblies, UV shields and UV flood lamp stands. Complete UV flood systems are also available.

The Dymax 2000-EC Series UV curing flood lamps are designed for general purpose, low-intensity curing of UV adhesives, coatings, and inks. A Dymax 2000-EC UV flood lamp is designed to effectively limit output energy to longwave (UVA), the worker-friendly portion of the spectrum. The 64-square-inch curing area of the 2000-EC Series UV flood lights make them well suited for laboratory production and large-batch processing.

2000-EC UV curing lamps are used for a variety of UV bonding, UV potting, UV sealing, UV tacking, and UV encapsulating applications within the industrial, automotive, electronic, medical device, and optical industries.

The 2000-EC UV curing flood lamp consists of a power supply, reflector housing and 400 Watt metal halide UV curing bulb. Accessories can be ordered with or retrofitted to the UV curing lamp after purchase, including shutter assemblies, UV shields and UV flood lamp stands. Complete UV flood systems are also available.

225 mW/cm²; curing in 5-30 seconds is typical using Dymax light-curable materials; complete protection from UV light makes Dymax flood lamps worker friendly; simple to operate and available with or without shutters; use as bench-top curing systems or integrate into automated assembly systems; flood lamps come with standard 400 Watt metal halide longwave bulbs (shortwave and visible UV curing replacement bulbs are available for unique UV curing applications)

Available Globally – CE-Marked